Introduction: MARSHMELLOW FOOT CANNON

FOOT ACTION MARSHMELLOW CANNON GOOD FOR SHOOTING MARSHMELLOWS LONG RANGED!'

DISCLAIMER: MAKE NO MISTAKE, THIS IS A WEAPON. DO NOT SHOOT AT ANYTHING FRAGIAL OR ANYONE. IF ANY PROBLEM OR DESTRUCTION IS CAUSED BY THIS, I CLAIM NO RESPONSIBILITY.'

Step 1: What You Need!


2FT 1/2in. PVC ( you might want more)'
2 1/2in. elbows'
1 1/2in. cross'
2L or 1L coke bottle'
PVC cement or stong tape'

PVC MEASUREMENTS:'
A= 19in. (optinal)
B= 2in.
C= 2in.
D= 6in.
E= 2.5in.
F= 6in. '

Step 2: Connecting Peices Together!

Peice (A) goes into the top of the (cross) ! Then Peice (B) goes into the right side of the (cross) then is connected to a (elbow) then is connected to (F). Take peice (C) and connect it to the (Elbow) thats connected to (D) , then you will have one hole left ..... you will put (E) into it and attach a bottle to it using tape ! IF you use glue dont glue the legs cuz they will need to move in elevation !! '

Step 3: SHOOT IT!!

to shoot it put Marshmellow down barrell and step on bottle real hard ! it should send the marshmellow really far ! if it doesnt look for leaks and patch them with duct tape ! well i will be making a super launcher instructable in a while so help give me comments on how to get them to work better !! i am up to anything that involves PVC and shooting things!!!!

this is my first instructable so please dont critisize me if its not good ! so thanks and tell me how it goes any if there is any problems with it !!'

Step 4: Ammunition!

THERE are 3 kinds of darts i use would probally be:

The first would be.......
The broadhead! To find out how to make it and to see the pics of it go to this instructable !

https://www.instructables.com/id/the-BEST-blowgun/

Another would be.....

The Extreme Marshmellow! To make the dart you take a nail or screw and stab it through the marshmellow! There you have it a Extreme Marshmellow dart!!

The last one is .........

Pure hard core normal marshmellows! lol they work the best!! '

Comments

author
the computer no1 made it! (author)2014-01-04

Instructions dude I cant make it stop yelling

author
Mikey schon made it! (author)2011-05-20

Well this just my opinion but you could add some more pipe so the bottles flat and not on a angle

author
codongolev made it! (author)2008-11-01

quit yelling.

author
spudling9 made it! (author)2008-10-25

cool

author
rootbeerben3 made it! (author)2008-07-02

This is cool, but i make is where you pump up the tank and fire it with a ball valve

author
Shagglepuff made it! (author)Shagglepuff2008-07-23

You dont pump it up; you stomp on the bottle to launch it.

author
rootbeerben3 made it! (author)rootbeerben32008-08-31

im just saying thats how i did it

author
schmidtty made it! (author)2008-04-10

i would use like a cork from a wine bottle or something and put a nail on through it

author
receiver545 made it! (author)receiver5452008-04-14

yeah! dude i need to try it!'

About This Instructable

10,968views

21favorites

License:

More by receiver545:DIY homeade nerf airsoft gun PVC BowAIRSOFT PVC BIPOD with LASER
Add instructable to: