Introduction: MCPE Cars: the Convertible

Picture of MCPE Cars: the Convertible

Heeeeeello again the instructables community. In this instructable I will show you how to make a convertible in MCPE. Hope you enjoy.

Step 1: The Base

Picture of The Base

For the base do a 10X5 of any material that has a stairs and slabs version. Then replace the material with stairs and slabs as shown in the picture.

Step 2: The Thing on the Back

Picture of The Thing on the Back

Next, to do the thing in the back (don't know what it's called) just place stairs and slabs like in the picture.

Step 3: Sitting Area/Windshield

Picture of Sitting Area/Windshield

For the sitting area just cut a 2X3 hole where you want it to be. Place wooden stairs down for seats and carpet for the floor. For the windshield do a C around the sitting area with glass pains.

Step 4: Finishing Touches

Picture of Finishing Touches

For the finishing touches replace blocks with slabs for the wheels and make headrests with stairs and slabs.


About This Instructable




Bio: I'm into props, creative recipes, cool things in general, and life. Im bilingual, Spanish and English. I can be funny. I can solve a ... More »
More by Purple_Matter:Collectionception3D Printed Koch Snowflake OrnamentHoly 15 Great Batman Instructables!
Add instructable to: