Print PDF
Favorite
Email
Step 5Mount the carousel onto the wood
Put the threaded potentiometer shaft through the pre-drilled 1/4" hole in the wood.
Thread the second 1/4-20 hex nut onto the shaft of the potentiometer, and tighten down the nut so that the carousel points forward when the potentiometer is in the exact center of its analog range. I marked the tip of the shaft with the sharpie marker to facilitate this task.
Thread the second 1/4-20 hex nut onto the shaft of the potentiometer, and tighten down the nut so that the carousel points forward when the potentiometer is in the exact center of its analog range. I marked the tip of the shaft with the sharpie marker to facilitate this task.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
