Print PDF
Favorite
Email
Step 8Attach remaining hardware and electronics.
Screw the brackets onto the piece of wood with wood screws. Pin a corner of the gearbox onto one of the brackets. Fit the timing belt onto the carousel and the drive pulley. Attach your tension spring between the two brackets, using some bailing wire for additional length if needed.
Now, I screwed my H-Bridge PCB (surplus from an old project) onto the piece of wood, between the two brackets.
Now, I screwed my H-Bridge PCB (surplus from an old project) onto the piece of wood, between the two brackets.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
