Introduction: MINI DREMEL TOOL

u can find cool diy videos on my youtube channel dont forget to subscribe!

making small dremel tool warning keep fingers away from sharp blades to avoid cuts from sharp blades

Step 1: Materials

Picture of Materials

dc motor

tape

soda bottle cap

battery

switch

Step 2: Ram the Cap to Get the Shape Shown in Left Side of Image

Picture of Ram the Cap to Get the Shape Shown in Left Side of Image

to avoid injury be careful

Step 3: Connect Motor and Switch to Battery

Picture of Connect Motor and Switch to Battery

Step 4: Using Hot Glue Stick Motor to Battery

Picture of Using Hot Glue Stick Motor to Battery

Step 5: The Wires Are Attached to Battery Using Insulation Tape

Picture of The Wires Are Attached to Battery Using Insulation Tape

Step 6: Mini Dremel Tool Is Ready the Working Is Shown in Video......check the Above Link

Picture of Mini Dremel Tool Is Ready the Working Is Shown in Video......check the Above Link

Comments

rafununu (author)2016-08-22

Dremel has really fallen down, deeper you can't !

d3ath101 (author)2016-08-21

Probably better for polishing small stuff. Neat though.

ROBO HUB (author)d3ath1012016-08-22

thank you....

About This Instructable

1,768views

46favorites

License:

Bio: Hi I'm JEEVAN! I am a 20 y/o studying MECHANICAL ENGINEERING and I use my course as an inspiration for making my current ... More »
More by ROBO HUB:How to Make Aeroplane Using DC MotorAwesome DIY CarHow to Make Loud Trip Wire Alarm System
Add instructable to: