Print PDF
Favorite
Email
Step 4COMPLETION
Complete the assembly- This box design uses cross bars that support the the wire axle.
Test the sticks and adhesion to the strings.It should be a sharp release note that sounds for 2 seconds until the key is released and is now non-vibrating state. Use a block of Poly foam[urethane] to stop the down word travel of the keys. see note book pages and pictures..
Add a piece of card board above the keys and mark the sharps notes locations.
THIS COMPLETES THE PIANO ASSEMBLY-- HAVE FUN PLAYING. [Let me know of any problems.
Test the sticks and adhesion to the strings.It should be a sharp release note that sounds for 2 seconds until the key is released and is now non-vibrating state. Use a block of Poly foam[urethane] to stop the down word travel of the keys. see note book pages and pictures..
Add a piece of card board above the keys and mark the sharps notes locations.
THIS COMPLETES THE PIANO ASSEMBLY-- HAVE FUN PLAYING. [Let me know of any problems.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
