Introduction: MINI VAN
INTRODUCTION:Hi i am Madhusudhan i am from Kaggalipura I Made a project that called MINI VAN. It is very good for play and looking. I made this project for improve my craft skill and also for fun.
Step 1: MATERIALS REQUIRD
6:CARD BOARD ROLLS
Step 2: MEASURE THE CARD BOARD
Mark the cardboard using a ruler and pen, so that you can cut using a cutter following the lines.
The cardboard must be cut into 2 pieces of 2.5 cm x 8 cm each.
Step 3: CUT THE MEASURED CARD BOARD
take the cutter and cut the measured length like this
Step 4: CUT THE HEAD OF THE VAN LIKE THIS
take the cutter and card board cut that like this
Step 5: AND ASSEMBLE IT IN THE GLUE GUN LIKE THIS
assemble the cuted card boards like this and fix with the glue gun
Step 6: ASSEMBLE THE WHEELS
take the broom stick and bottle cap and fix it with the glue gun like this and assemble it on the bottom of van
Step 7: FINALY YOUR MINI VAN IS READY
We have a be nice policy.
Please be positive and constructive.