Introduction: MKPV1 Instructions

Do you need a compact knex weapon that can fit in you pocket? Are all the other choices too large or heavy for your mission? Do you hunger for a slim, light, and comfy pistol that you can use to take out foes at closer ranges? Then this is the right gun for you. If you need a repeater that shoots 100+ feet with a great ROF, probably not. But what makes this so special is that it is Corgi approved. And yes, that IS my dog. He looks better in real life, but you get the point. Now the name is sorta embarrassing. While MKPV1 sounds pretty awesome, it just means "Mini knex pistol version one," which is pretty lame. So don't complain about it.

Some simple stats:

Range: 50+ feet with three bands

Capacity: One

Handle: Small, yet comfy

Ammo: Any rod larger then a green

Reliability: High

So now that you are completely convinced you need this pistol, let's get right to the parts list! (If you don't build this, my dog will hunt you down and bite your ankle. [He can't reach much higher] LOL, maybe not, but I would watch out if I were you, because you never know when my fence may fall down and my dog may escape.)

Please comment and subscribe.

Step 1: Parts List!

Ok, so I spent time counting the pieces so you know if you have enough. However, I did a pretty quick job of it, so it might not be 100% accurate. Still, it is much better then nothing.

Green rods: 35

White rods: 20

Dark grey cons:5

Light grey cons: 2

Red cons: 3

Green cons: 6

Brown cons: 5

Hinges: 2

Little black wheels: 2

Y clips: 12

Blue clips: 3

Tan clips: 2

Cut white: 1 (Not needed)

Rubber bands: 7 (More or less, depending on how you band the gun. I would recommend 3 size 64's for the pin, 1 size 64 for the handle, 1 size 32 for the trigger, and 2 little bands for the impact thingy and the bullet lock.)

Step 2: Build These Bits

No text really needed. Build these parts. The next step is just as easy.

Step 3: Putting the Bits Together!

So, just follow the pics and read any image notes, ok? Sorry about how the pics are all over the place, my bad.

Step 4: Rubber Bands!!

This gun is pretty fiddly when it come to rubber bands. The way I have placed the bands isn't the best, so mess around with it until it works for you.

Step 5: Shooting

This part is easy. Pull back the pin all the way, you should hear a soft "click." Then place a rod in the muzzle just far enough in to make the bullet lock catch the rod so it doesn't fall out. Here is the really fun part. Aim at a target (not your sibling) and pull the trigger. If it is built right and the bands are in the right position, a little piece of plastic should fly a considerable distance with reasonable accuracy for a couple dozen feet before totally losing accuracy. It can shoot farther, just not very straight.

If you have made it thus far, thank you for building and rest assured my dog will not harm you in any way. If you haven't built it, well... we never know. JK

Comments

author
CorgiCritter (author)2017-03-01

author
The Knex Inventor (author)2016-06-11

Excellent pistol!

author
JonnyBGood (author)2015-02-26

Wow..... probably the cleanest mini pistol I have ever seen....(browses quickly) nope it is the cleanest. Very good job!

author
CorgiCritter (author)JonnyBGood2015-02-26

Why thank you!

author
sarahhanahghan (author)2015-02-23

excellent designs

author

Thank you.

author
Knextremely stupid (author)2015-02-22

Dude that's awesome

author

Thank you!

author
sandroknexmaster (author)2015-02-18

Looks sweet!

author

Thank you! I subbed you, by the way.

author

Thanks!

author
didexo (author)2015-02-16

Very nice. I'll consider building. Just a tip of personal advice, don't put those filters on the pictures of the gun, I find the majority of people don't like them. That aside, I like the gun. You've earned yourself a follower.

author
CorgiCritter (author)didexo2015-02-16

Thank you so much, man! When I got this account I never would have dreamed you would follow me! As for the filters, I kinda like them, but will have less in future ibles. I have another ible up, and I sorta forgot to take pics without filters, and now it is in pieces on my floor while I wait to be inspired for my next gun.

author
didexo (author)CorgiCritter2015-02-18

Oh really? And that;s fine. Look forward to seeing it.

author
CorgiCritter (author)2015-02-16

Thank you for the favorite!

author
CorgiCritter (author)2015-02-16

Thank you for the favorite, whoever it is!

author
CorgiCritter (author)2015-02-16

OK, thanks for the tip!

author
KnexGuy15 (author)2015-02-16

Awesome!! I am going to try to make this. Great first instructable, but I saw that your tags were all in one line. When you do tags, you should list the like this: knex gun, pistol, rod, etc. Just a little tip ?

author
CorgiCritter (author)2015-02-15

I sort of do too.

author
TheDunkis (author)2015-02-15

I'm glad we got some new builds coming. While this is simple, I can tell with the experience you have with other people's guns, you'll go places.

author
CorgiCritter (author)TheDunkis2015-02-15

I know that it is simple, but it works. I hope to build some more innovative guns in the future. Thanks for the comment!

author
CorgiCritter (author)2015-02-15

Thank you!!!! that means so much! I think It seems just a little too chubby looking, but in reality, it is pretty slim. Oh, and I do have plenty of parts, it is just that they were all in Red's PDR and a TR8. Both of those are apart now, and being used to build your M4.

author
Zombiekiller-93 (author)2015-02-15

Well done on your first instructable, good job on adding a parts list and you should also add the word 'instructions' in the title so other people know this

author

Thanks, and I will be sure to chance the title.

author
sonic broom (author)2015-02-15

That's cool and it is super compact too. and i'm looking forward to your future guns.

author
myOmy (author)2015-02-15

Amazing first instructable, and the gun is alright/ok.

author
CorgiCritter (author)myOmy2015-02-15

Thank you so much for the kind comment! I know that I am capable of better guns, but I failed to build a good pistol three.times in a row, and so I posted this. (This was, in fact, built this fall. I had pictures of it, so I rebuilt it and posted.)
I have plans to build BM's M4, and if I can get it to work, I might post some instructions for it.

author
Lucas The Boss (author)2015-02-14

This looks great, is this a review or your own design?

author

And if you like what you see, would you mind subbing? It would be really awesome if you did. Still up to you, though. :D

author
CorgiCritter (author)2015-02-14

My own design. It uses a pretty simple mech that isn't really new, but it works and that is what matters. Did you read the into and the ending? Both are sort of funny IMO.

About This Instructable

445views

7favorites

License:

Bio: I enjoy archery, knives, and building weapons. I used to build with K'nex.
More by CorgiCritter:Plastic Perfection Kap KarbineProject SlamFire.... With Video!
Add instructable to: