MOBILE LUMBER CART & WORK STATION

50

2

Posted

Introduction: MOBILE LUMBER CART & WORK STATION

I wish to share my latest project just completed.

Step 1: MOBILE LUMBER CART & WORK DESK/STATION

MY FIRST PROJECT OF 2018 -A GRAND MULTI UTILITY LUMBER CART.Exclusive lumber cart is too much of a luxury. I wanted it to provide home for most of my hand tools, clamps etc PLUS a working desk to place some power tool, or sanding desk. Desk is at 33" high, 10" wide and is hinged, so it can be lifted to access lumber from top too, though it is open on left and right.Base is 24" by 48" with reinforced corners to mount 5" castors (2 lockable) Four vertical partitions, creating 3 compartments. Partition heights are 16" (box type) center 28* with hinged desk, fully open with 36* partition with edge support of 10" to prevent any plywood sliding. I would place non skid mats in open compartments and hooks for hand tools and clamps to be added after paint dries.

UNIQUE FINISH, I have used wall putty to close pocket holes, wall primer and acrylic wall emulsion for final coat.

Share

    Recommendations

    • Spotless Contest

      Spotless Contest
    • Pocket-Sized Contest

      Pocket-Sized Contest
    • Microcontroller Contest

      Microcontroller Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    2 Comments

    Thanks for your feedback. Unfortunately, i did not take pictures during build. I would remember to do, when I start my future projects.