Instructables
Picture of MP5K
100_5742.JPG
100_5743.JPG
100_5715.JPG
mp5k.jpg
Here is my knex MP5K . It's my entry for the MW2 contest. AND IT WON!
Its a good replica with these features:

*Shoots Dark Gray Connectors
*Angled Removable mags (normal or high cap)
*Realistic
*Good sights
*Fore-Grip
*Optional upper receiver with rails (Not Posted - Just replace 3rd and 5th layers with whites and yellows)
*Good for a replica or side arm

Review: http://www.instructables.com/community/Knex-MP5K-review/
PLEASE COMMENT RATE AND SUBSCRIBE!!!

 
Remove these adsRemove these ads by Signing Up

Step 4: Loading the mag into the gun properly

Picture of Loading the mag into the gun properly
100_5825.JPG
100_5826.JPG
100_5827.JPG
Insert the MAGAZINE (not clip) into the gun correctly for it to shoot right!

Step 5: Mods

Here are mods made to the gun that have been made by me, or you guys.
--------------------------------------------
Mag release, with a few other attachments. Made by: osi
http://www.instructables.com/id/Mag-release-for-shadowninja31s-MP5k-The-Instru/

Step 6: Your Guns

Picture of Your Guns
FMPVRAUG9GQFBGZ.MEDIUM.jpg
FIOA7V7GBF5KRJ5.MEDIUM.jpg
FRMX8PPGDCUNP73.MEDIUM.jpg
FBNMECJHIF052WR.jpg
Here are some of your versions of this gun!
Pic 1 - John Copper's version
Pic 2 - Ymerej88's version
Pic 3 - knex gun builder's version
Pic 4 - osi's version. He added a mag release that works!
Pic 5 - Dr MonkeyMan's version
1-40 of 286Next »
Here is a photo of my modifications.
MP5Kmod.JPG
shadowninja31 (author)  Dr MonkeyMan1 year ago
Sorry it took a while, but it's up there now!
Ok thx!XD
Hey shadowninja im new and i made some mods for your gun and i was wondering if i could post them
shadowninja31 (author)  Dr MonkeyMan1 year ago
I'll need you to send some pictures and info or something but sure!
(this comment is only for people who want to accept this challenge) If you can, I want to see if anyone can make a knex version of the Nerf Vortex Nitron. I will leave some pictures of it in my profile. If you want to try this, comment below this comment. If you think you have succeeded after making it, comment below the acception of the challenge.
Hey, I modded both mags a little bit, because for some reason, the ram would knock the mag out of the gun. So I added some parts and cut some parts to fix the problem. I will try to upload some pics that show what I did. :)
shadowninja31 (author)  2000smartkid1 year ago
Interesting. Yeah that would be helpful I'd like to see what went wrong.
Actually, I just made it again (because I had taken it apart) and I found out why the ram would knock the mag out of the gun. It was because the mag wasn't in the gun right. So I put it in the right way, and the ram doesn't knock it out.
james43 years ago
5 female ball joint connecters.............. THIS IS MADNESS
not for me, I have 9 female ball joints
shadowninja31 (author)  james43 years ago
Yup
eLeMeNtLtd.2 years ago
Shadowninja31, may i use the mag removal system for my gun? plz reply as fast as possible.
shadowninja31 (author)  eLeMeNtLtd.2 years ago
Sure, but credit would be nice.
thebomb7452 years ago
how many pieces of each does this take?
shadowninja31 (author)  thebomb7452 years ago
I don't know off the top of my head sorry.
mr.knexer2 years ago
is the mag removeable?
shadowninja31 (author)  mr.knexer2 years ago
Yes
rlaxrlax2 years ago
just some advice on the rubber band try using small ones for the trigger and size 64s for the firing pin
rmeyssen2 years ago
nice gun realy like the mag
shadowninja31 (author)  rmeyssen2 years ago
Thanks!
didexo3 years ago

I like the design but the mag is hard to put in and messes up the firing
robbinrook3 years ago
What are femail joint connector or whatevah...
shadowninja31 (author)  robbinrook3 years ago
They kinda look like dark gray connectors with the ends cut off and they are black.
what kind of 'things do u shoot with? which partz?
shadowninja31 (author)  robbinrook3 years ago
Dark gray connectors
Hi (again) uuhm. If i load the mag with the dark grey connectors an i let it go then everything springs out. And u cant just insert the mag full loaded, is this normal? And if its not, how can u solve the problem?
shadowninja31 (author)  robbinrook3 years ago
I had to hold back the mag pusher, but you could insert a green rod in the white connectors hole to block the pusher....
shieldsam3 years ago
5*!
shadowninja31 (author)  shieldsam3 years ago
Thanks!
CODKING3 years ago
ok i fixed the shooting prob all i had to do i make the high cap mag and replace the parts where it bent w/ orange ladder conectors so it actually looks like the extended mag on black ops now
reg mag.jpgmodded mag.jpg
shadowninja31 (author)  CODKING3 years ago
Okay
i dont know i just found it to work better
(removed by author or community request)
Sure!
CODKING3 years ago
wait are the wheel things on pic 16 needed or r they just for looks
shadowninja31 (author)  CODKING3 years ago
Optional. For comfort.
k thnx
gassybeans3 years ago
in this step u pretty much build the whole gun
shadowninja31 (author)  gassybeans3 years ago
Well that's how things go.....
1-40 of 286Next »