Instructables
Picture of MS021 Instructions
This is my Ms021 instructable. Build it if you want. Ammo blue rod. Range - Depends on rubber bands. *I'm not responsible for any thing you do with this gun, if you are being stupid and decide to shoot at someone's eye, that's your fault, not mine.*
 
Remove these adsRemove these ads by Signing Up

Step 2: Butt and the Stock/ Slide and Trigger!

DSCN1648.JPG
DSCN1646.JPG
Build!

1-5 Butt

6 Slide

7-10 Support/ Stock

11 Trigger
Rest is putting together the knex

Step 3: Forgrip.

Picture of Forgrip.
DSCN1667.JPG
DSCN1668.JPG
Build.

Step 4: Barrel

Picture of Barrel
DSCN1671.JPG
DSCN1669.JPG
DSCN1672.JPG
DSCN1673.JPG
Build 1-3 barrel

Last is connecting the For grip to it.

Step 6: Chamber

Picture of Chamber
DSCN1688.JPG
DSCN1689.JPG
Chamber

Pic 1 Use it if your haveing trouble building.

2-6 Chamber

Rest is the mag entrance and some other crap.

Step 9: Rubber bands, and putting the mag in.

Picture of Rubber bands, and putting the mag in.
Yes!
Zoticus5 years ago
how are the two purple or grey connectors positioned under the tape? And what do you mean by "don't cover the holes"?