Introduction: MST-756 Easy Reload Mod

if you have seen my gun the MST-756 i noted that it is hard to reload. this will make it much easier to reload in a shorter amount of time. look at the pictures

you will need
16 ball connectors
16 socket connectors
16 hinges
64 black rods

Step 1: Mod the Guns

you need to replace four of the blue rods with ball-and-socket joints and hinges

1. before mod
2. after mod

do this with all the guns

Step 2: How to Use It

now it is easier to load the guns
1. how to start
2. unclip the green connectors
3. fold the gun down
4. load it
5. fold it back up and reclip it

you can fold all of them down at one time and load them lake that too (4 & 5)

Step 3: Finished

You don't need to put the green connectors on at all in the front, but i find it help with stability. Thanks for looking and i hope this helps.

Comments

author
Gargamel-Knex made it! (author)2013-09-09

Nice!

author
Football viking boy made it! (author)2011-06-11

64 black rods?????????? AHHHHHHHHHHHHH

author

hes talking about the short green ones not the long one use for rams

author
Dumchicken made it! (author)Dumchicken2011-12-21

i have about 300 long ones

author
matstermind made it! (author)matstermind2011-11-27

correct

author
matstermind made it! (author)matstermind2011-06-11

if i remember correctly, yes

author
Wicky made it! (author)2010-03-12

Heh, didn't realize this was a gun untill I read a bit more, could be a very good spider ^^

author
aleceatsfood made it! (author)aleceatsfood2010-12-12

very much argeed

author
matstermind made it! (author)matstermind2010-03-12

i thought of that when i was building it

author
TigerNod made it! (author)2010-03-12

Lol, it looks like a spider! Great job, 4.5.

author
KnexFreek made it! (author)2010-03-08

 LOL 64 black rods!! LOL 
U izz funnee :)

also nice mod! 5*

author
~KGB~ made it! (author)2010-03-08

nice mod!

author
matstermind made it! (author)matstermind2010-03-08

thanks

author
~KGB~ made it! (author)~KGB~2010-03-08

no problem!

About This Instructable

1,733views

3favorites

License:

Bio: I am an engineering graduate who is constantly tinkering, making, and building. I have always enjoyed disassembling old electronics and re-purposing them. I enjoy anything ... More »
More by matstermind:Chimera: $60 DLP High-Res 3D PrinterLEGObot 3D PrinterYet another Arc Reactor
Add instructable to: