Print PDF
Favorite
Email
Step 2Pop open your tablet and remove the sensor
It should be pretty easy to find the screws on the bottom of your Wacom tablet that hold it together. If you don't see them, look under stickers or rubber feet.
Crack that baby open and pull the sensor out. There will probably be a plastic film and a metal sheet in there as well. Make note of their arrangement. You need those, too. They reduce electro-magnetic noise. I actually taped mine to my tablet to keep them in place.
On the front side of the sensor - the side that will be in contact with the back of the screen - I covered any parts that would be in contact with one layer of electrical tape to prevent shorting.
Crack that baby open and pull the sensor out. There will probably be a plastic film and a metal sheet in there as well. Make note of their arrangement. You need those, too. They reduce electro-magnetic noise. I actually taped mine to my tablet to keep them in place.
On the front side of the sensor - the side that will be in contact with the back of the screen - I covered any parts that would be in contact with one layer of electrical tape to prevent shorting.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
