Step 19: Final Test

Press remote 3 key to move robot into the “ready mode” position. Place the ruler with Tic-Tacs on the support stands.

Press remote key 4. The Mad Dog Robot should move forward, close the jaw around the ruler, move backward and begin rapidly tilting the ruler side to side to shake out all the Tic-Tacs.

After about 20 seconds of shaking, with all the Tic-Tacs now hopefully shaken out, the robot with re-center the neck, move forward and return the ruler to the support stands. Job well done!!!

About This Instructable




More by e024576:Simplified Arduino AC Current Measurement Using ACS712 Hall Effect SensorMotorcycle Mirror Mounted Watch Easy Motorcycle Windscreen Toll Road Transponder Quick Mount (EZ-PASS, iPASS  etc.)
Add instructable to: