Print PDF
Favorite
Email
Step 4Basic Structure
Refer to sketch #5.
Following drawer slide kit directions - attach the roller part to movable platform (part A), and other half to hardwood drawer slide mounts (part F). Test everything together and then use ¼ inch hex head bolts and T-nuts to attach drawer slide mounts to the base (part C). Once you're sure that everything slides smoothly, slide out the movable platform away from the base.
Finally, using wood glue, two # 8 wood screws 2 ½” long, ¼ inch carriage bolt nut and washer, attach 2 x 4 upright to moving platform. See photos.
Following drawer slide kit directions - attach the roller part to movable platform (part A), and other half to hardwood drawer slide mounts (part F). Test everything together and then use ¼ inch hex head bolts and T-nuts to attach drawer slide mounts to the base (part C). Once you're sure that everything slides smoothly, slide out the movable platform away from the base.
Finally, using wood glue, two # 8 wood screws 2 ½” long, ¼ inch carriage bolt nut and washer, attach 2 x 4 upright to moving platform. See photos.
Sketch #5.pdf515 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
