Print PDF
Favorite
Email
Step 5Details booring....
Add weather seal to edges of goggles and some foam with fabric to inside of goggles, throw it all togeather
The little side light is made of foam, brass wire, an LED and a small camera lens, the woven cover is some junk I found in the Christmas section of the craft store.
Make some lightning bolts from scrap alu, or brass,
The electronic and battery is held in an Altoids box with some old calculator parts soldered on the front.
OK now go scare some kids....
The little side light is made of foam, brass wire, an LED and a small camera lens, the woven cover is some junk I found in the Christmas section of the craft store.
Make some lightning bolts from scrap alu, or brass,
The electronic and battery is held in an Altoids box with some old calculator parts soldered on the front.
OK now go scare some kids....
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jan 29, 2012. 10:52 AMJBZG
says:
Another excellently made 'ible...great looking and pleasingly scary....
Reply
 |
Add Comment
|
