Magazine Fed Pistol With Holster! NOW WITH TRUE TRIGGER!!!

This is my first pistol I have posted, but I have also made a moded killerk, mykhailo's semi-auto (the one on the forum) and one just for fun. It shoots green rods about 35 feet accurately, but 65 feet is the farthest with two elastics. This pistol can be equipped with a scope, bi-pod, stock, grenade launcher you name it. I am not including any of those in this instructable, but you can make those yourself. I am posting a rifle soon and that will include a bi-pod, scope, R.I.S front grip and maybe a grenade launcher. Read more on the last step of these instructions. and now it is updated!

The holster is the first I know of on the site. I don't know if it is the first, but that is what I'm hoping. You can mod it with bendy rods and other stuff if you like, but please give me credit. The stereotype holster clips to the leg, I used a simpler belt holster.

I give credit to knexgunfan for the idea, killer6 for the mag design and every knex gunner willing to build this! Have fun, don't hurt anything and be safe.

Mintyhippo is not liable for destruction of property, injury or death

DON'T FORGET TO RATE!

just kidding about the death! =-)

Step 1: The Mag Handle

This is the mag / handle. Loads green rods through the bottom.

Step 2: Ram, Fireing Pin, Whatever You Want to Call It

Do what ever you want for the back of the ram, but keep the yellow connectors and the tan clip on.

Step 3: Barrel and Chamber

You can use yellow connectors, orange or white for this step, but keep the whites I tell you to use.

Step 4: Put It Together

Elastic placement and placement of parts.

Step 5: Trouble Shooting

1. The pusher doesn't push the round all the way into the chamber.

1. Could be a jam, push lightly to see if it was just crooked. If you can't push it in, unload the mag and reload OR push the rounds on the side. (look at the second picture)

2. The round doesn't come out of the barrel.

2. The barrel is probably made from bent rods. Make sure that the rods aren't bent and if they are, replace them.

3. JAM, JAM, JAM!!!!

3. Make sure there is a lot of tension pulling up the pusher OR put a blue spacer in-between the tan clips of the chamber.