With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I had a problem, there was a stack of partially read magazines on the floor by the head of my bed, gun magazines, popular mechanics, knife world, all ...
(sorry, I didn't get many pics for this part, forgot about it) Supplies - angle iron (1"x1") 1x5 board (get the nicest looking one you can find) stai...
First I cut off the torch cut ends so I would have nice clean ends. Then you cut out all the pieces you need. 4 -14" peices, 4-12" pieces, then 4 upr...
Get everything set up for welding a frame. Make sure everything is set the way you like it, and tack weld all the corners before welding them fully.
Once you have the frames welded, you need to weld up the whole box. Use clamps and a square to keep everything as straight as possible. I tacked two u...
last things you need to do for the metal frame is drill holes that the copper tacks will fit through, at the intervals you want them, and then paint i...
Cut your boards to the length you want, you'll need to do some figuring to get the perfect measurements. The boards need to be the length of the side ...
I sanded all the boards to 220 before finishing them. Then I made them look nice. I put on a coat of stain, and while it was still wet, singed the woo...
Assembly is fairly straightforward. Take the glue, and put a bead in the corners of the frame, all the way around. Slide in the boards, and hammer in ...
Remove these ads by
Signing Up
Not NiceInappropriateSpam673 views
6 favorites
Posted:
Mar 16, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »