Introduction: Magic in a Bottle

Supplies:
Apron
Goggles
Gloves
3 beakers
Stiring rod
Glass jar with a screw on top or a glass soda bottle with a cork
3 grams of Silver Nitrate
3 grams of Sodium Hydroxide
4 grams of sugar
Ammonia
H2O


WARNING!
Do NOT make it over than 2 hours. (it will create a toxic gas after awhile)
Needed to be made in a vented area.
Make sure to wash the chemical when finished!

Step 1:

Step 1.
Get ready for safty! Put on your apron, googles, and your gloves.

Step 2:

Step 2.
Place the 3 grams of silver nitrate into a beaker and add water and stir until the silver nitrate disovles.

Step 3:

Step 3.
Place the 3 grams of sodium hydroxide into a beaker and add water and stir until the sodium hydroxide disolves.

Step 4:

Step 4.
Pour the disolved silver nitrate and the sodium hydroxide into your jar or glass soda bottle. In return you will get a brown liquid that looks like watery mud.

Step 5:

Step 5.
Add ammonia into the same jar or glass soda bottle until the chemical liquid truns back to a clear liquid.

Step 6:

Step 6.
Add the 4 grams of sugar into the same jar or glass soda bottle.

Step 7:

Step 7.
If you have a glass jar, screw on your lid. If you have a glass soda bottle, close it with a cork

Step 8:

Step 8.
Shake your jar or glass soda bottle vigorously until the inside is not transparent.

Step 9:

Step 9.
Wait until your jar or glass soda bottle turns sliver.

Step 10:

Step 10.
As you dump the remains in the sink. YOU NEED TO DILUTE THE LIQUID WITH WATER WHILE YOU POUR DOWN THE DRAIN!

Step 11:

Step 11.
Re close your jar or glass soda bottle and NEVER open it!