Introduction: Magic of Christmas Ornament
This is an ornament you can make with Tinkercad and a 3D printer.
Step 1: The Green Circle
Choose the Torus Thin geometric shape. Change the color to dark green. Increase its size to 60mm. Flip it so it stands up.
Step 2: The Star Shape
Open symbols and choose the star shape. Change the color to gold. Increase its size to 56mm. Put another star on the board and make it a hole. Increase its size to 45mm. Place the hole star inside the gold star. Adjust as needed. Once you have it lined up, group the stars together to create the outline of a star. Flip it so it stands up.
Step 3: The Heart
Open the symbol menu. Choose the heart shape. Increase its size to 28mm. Place the words "Faith", "Love", and "Magic" on the board. Line them up and group them. Make them holes. Still as a group, place them on top of the heart shape, line them up and adjust their size to fit the heart. Once they are lined up correctly, group them together with the heart.
Flip the heart and place 2014 (again as holes) on the reverse side.
Stand the heart on end.
Step 4: Putting It All Together
Place the Star (turned 90 degrees) inside the Torus.
Place the Heart (turned 45 degrees) inside the Star.
Add a Torus Thin to the board. Color it silver and reduce its size to 8mm. Place on top of the Star.
Congratulations, you now have a beautiful ornament!
(H. King, Scottsdale, AZ)
We have a be nice policy.
Please be positive and constructive.