Print PDF
Favorite
Email
Step 4Adding a base
For the surface to stick to the bottom of the mouse to wipe the drywipe markers from the board I chose some sponge cloths from the supermarket. You could also use felt or any other non woven fabric. It should be 1-3mm thick.
Turn over your mouse, and with a pencil lead and paper rub it so you can see the outline of the base of the mouse. Cut this out and check it matches the bottom of your mouse.
Use the paper cut-out as a stencil to cut out the sponge. Reassemble the mouse then glue the sponge to the base of the mouse with a glue gun or super glue.
Turn over your mouse, and with a pencil lead and paper rub it so you can see the outline of the base of the mouse. Cut this out and check it matches the bottom of your mouse.
Use the paper cut-out as a stencil to cut out the sponge. Reassemble the mouse then glue the sponge to the base of the mouse with a glue gun or super glue.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
