Introduction: Magnetic Paper Towel Holder
Make a paper towel holder out of wood.
Step 1: Required Elements
1. Some plywood( I used some scrap plywood laying around.)
4. A Dowel Rod
5. Screw Gun
6. Mieter Saw.
7. Measuring Tape
My Dad bought one of these and I thought it would be an easy thing to duplicate. So I tried it out.
Step 2: Construction
The dimensions for the bases are 4 x 6 inches.
The sides are 3 x 6 inches.
Just screw the sides to the base and then the dowel rods to the sides. Then take the magnets and screw them to the back of the bases.
Step 3: Done
I was very satisfied with how it turned out. The one sides magnet could have been stronger but it still worked good.
Any comments, questions, ideas or complaints. Let me know!!