Magnetic Tool Rack

Step 3 Prepare the shelf

I used the wire brush and sandpaper to knock off the rust on the shelf. After doing this I realized that the paint on the shelves may have been lead paint. I cleaned my shop really well after, but I should have taken a few extra pre-cautions. Follow these steps http://www.cpsc.gov/CPSCPUB/PUBS/5054.html and if you are unsure, then don't risk it.

Following the manufacturer's specs, I coated the shelves with the rust paint in nice smooth layers. It helps to say smoooooooth to yourself while painting. :)

Let it dry. Completely.

Mine turned out real nice.