To make this item you will need a magnifying glass, sterling silver wire (I used 22 gauge but you can use thicker if you have heavier beads), jade, glass and pearl beads, and sterling silver chain. Tools required are a pair of round needle noise pliers, flat pliers and wire snipers.
Step 1: Creating a Link Step 1
Picture 1: Hold the piece of wire near one end with your needle noise pliers.
Picture 2: Then use your fingers to hold the longer end (bottom) of wire and bend it slightly back, then take hold of the short end (top) and bend it around the piers.
Picture 3: Once you have bent the wire around the pliers it will form a loop.