Print PDF
Favorite
Email
Step 9Solder - The Regulator
Regulators come in various case styles. Look at the specs and find the in, out, and common (ground) pins. Wire yours as needed.
The 2 capacitors should be very close to the regulator. They keep the regulator stable. Else it may go all freaky like. The capacitor values are not very critical.
I wish I hadn't run the wires from the piezo right through there. Makes the photo even more confusing.
The 2 capacitors should be very close to the regulator. They keep the regulator stable. Else it may go all freaky like. The capacitor values are not very critical.
I wish I hadn't run the wires from the piezo right through there. Makes the photo even more confusing.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
