Print PDF
Favorite
Email
Step 1Checklist
You will need:
Materials for one planter:
1. two wooden pallets
2. twelve timber angle brackets
3. optional: two pieces 6mm thick plywood offcut approximately 21cm x 30cm
4. self tapping screws & round wire nails of various lengths . I found the 50 & 75mm to be the most useful lengths, go to your local builders' merchant, rather than a DIY store, where you can purchase a bag of mixed sizes per weight. My favourite builder's merchant sells nails by the scoop, screws by the piece and parcels them up in newspaper doing away with all the point of sale PVC packaging.
5. wood glue
6. acrylic paint, white spirit
Tools:
1. eye protectors
2. protective gloves (your choice whether it is more sensible for you to work with or without wearing them.)
3. hammer
4. chisel
5. vice grips
6. hand saw
7. fret saw
8. measuring tape & pencil
9. fine guage paint brush
Materials for one planter:
1. two wooden pallets
2. twelve timber angle brackets
3. optional: two pieces 6mm thick plywood offcut approximately 21cm x 30cm
4. self tapping screws & round wire nails of various lengths . I found the 50 & 75mm to be the most useful lengths, go to your local builders' merchant, rather than a DIY store, where you can purchase a bag of mixed sizes per weight. My favourite builder's merchant sells nails by the scoop, screws by the piece and parcels them up in newspaper doing away with all the point of sale PVC packaging.
5. wood glue
6. acrylic paint, white spirit
Tools:
1. eye protectors
2. protective gloves (your choice whether it is more sensible for you to work with or without wearing them.)
3. hammer
4. chisel
5. vice grips
6. hand saw
7. fret saw
8. measuring tape & pencil
9. fine guage paint brush
planting_scheme.pdf(842x595) 463 KB| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
