Ever since "Legend of Zelda : Ocarina of Time" came out, everyone associates ocarinas with Zelda and there fore, anyone interested in ocarinas is considered a die-hard Zelda fanatic!! There is alot more to Ocarinas than Zelda you know. With this Instructable, you can learn how to make wonderful masterpieces THAT SING!! And you will learn a little about the history of the Ocarina but that is besides the point...
Step 1: The Clay
Well, obviously you need clay to make a clay ocarina. It is possible to make it out of wood but that will come some other time when i have the time, money and patience... Ocarinas have been around since the stone age. Aztecs used them for ritual purposes.
Step 2: The Mold
I made a simple, carrot shaped mold and with this, you just wrap the clay around and seal it up. The mold can be made by taking a large chunk of clay and rolling it out on a slant to make it a sort of "Carrot" shape.
Step 3: Wrapping the Mold
Take a hunk of that Clay and flatten it out about and inch longer than your "Carrot" mold. It must be at least 1cm thick too. You have to make it wide enough to wrap around the mold and have a bit extra.
Step 4: Making the Mouthpiece
While the main chamber of the ocarina is firming up around the mold, We are going to make the mouthpiece. Roll out a piece of clay how ever long you want to make the mouthpiece. Take a "slot stick" (i just use a Popsicle stick with the end cut off) and force it through the mouthpiece like in the picture. Shape it however you want. Ocarinas arent just made of clay. They can be made of wood, metal, plastic, or just about anything that can be molded and will hold its shape.
Step 5: Getting the mold out of the Ocarina
Cut the mold in half lengthwise and pull the mold out of the ocarina body.
Step 6: Optional Step
Look closely and notice the grooves put in the edge of the body halves. These help to grip the wet "slip" clay and make a proper seal.