Make A GhettoBlaster Tricycle

Step 3 Wiring

In the first image you can see that we added on the backing to the speaker box, we cut out a hole that would fit the stereo. We added the amp and started the wiring of the speakers, we just followed the same wiring that was in the previous speaker box, we just lengthened the wires so they would make it all the way across the box. Now wiring it can be hard because you got to make sure that the ground wires are actually grounded, we used some of the bolts holding the wheels onto the bike. You also have to make sure that the ignition wire from the car stereo is connected to the amp so it will turn on. I duck taped all the wires were they should be in the box so that when we cut the holes for the speakers i dont have to go looking for them. We drilled holes into the bottom of the speaker box into the battery compartment so we could hook the battery directly to the amp and have the ground wires unseen.