With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
A useful stand for a small mirror can be made out of cardboard and glue. Ladies can use it for an additional make-up aid, and an easy to store and c...
Mirrors come in all shapes and sizes, but I wanted to use a small one, and I had an extra mirror used in the car as a visor mirror. But, a hand mirro...
Cut a piece of cardboard 24in. by 6 in. wide. The base of the stand is simply the last six inches of the piece of cardboard, folded so as to form an ...
This piece is 5.5 by 5.5, scored at two inches, and cut to an angle of 15 degrees. See pictures and image notes for more detail.
The small piece cut previously is glued to the base as shown. This piece when scored and folded, allows the stand to remain in place on it's own, and...
Here, just a couple of pieces of cardboard about 1 in. by 3 in. are glued in place to act as a "stop" for the stand support piece. To make the stand m...
To hold the hand held mirror in position, I cut out four pieces of cardboard, cut to fit by tracing around the mirror handle, then using a bandsaw to ...
Position mirror of choice on stand. The visor mirror is simply clipped onto the top as shown, and the hand held mirror is held in place by the pieces...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »