Print PDF
Favorite
Email
Step 2Tools
I did this entire project with a hand crank drill!! The 1/2" bit didnt fit it so i wrapped a piece of scrap leather around it and drill it by hand!
you will need-
a soldering iron
a chisel (maybe)
solder
wire
drill
drill bits
saw (hack saw worked fine)
helping hands (optional)
you will need-
a soldering iron
a chisel (maybe)
solder
wire
drill
drill bits
saw (hack saw worked fine)
helping hands (optional)
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jan 31, 2009. 8:15 PMBradlez92
says:
by "helping hand," do you mean PHYSICALLY hands? or those spiffy alligator clamps?
Reply
 |
Add Comment
|
