Print PDF
Favorite
Email
Step 3The Cross Brace
Cut the widest stave about a half inch shy of the barrel top. Bevel the edges prior to burning and brushing the stave. Finish the stave with shellac or any of the other mentioned top coats I use at least 4 coats.
My Viking / Barbarian War Hammer Instructable covers burning and brushing wood.
Find the center of the stave and drill a hole for the t-nut. The hanger bolt is threaded into the t-nut and the depth is marked with a sharpie.
My Viking / Barbarian War Hammer Instructable covers burning and brushing wood.
Find the center of the stave and drill a hole for the t-nut. The hanger bolt is threaded into the t-nut and the depth is marked with a sharpie.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
