Print PDF
Favorite
Email
Step 5Cut a Piece of HST And Dry Fit The Plug
Cut A small piece of shrink tubing , of the size of the Small (Core) insulation ,
the Picture will give you instructions on how
Then Put the Plug on and insert the wires in their respective holes
The small tab with a hole in the center of pother lug is for the wire were
you insert the tubing ( The Core ) And the Other strand to the body of the plug
The pictures will give reference
the Picture will give you instructions on how
Then Put the Plug on and insert the wires in their respective holes
The small tab with a hole in the center of pother lug is for the wire were
you insert the tubing ( The Core ) And the Other strand to the body of the plug
The pictures will give reference
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
