Print PDF
Favorite
Email
Step 6Solder , Shrink And Crimp
Solder the wires to their respective tabs , clip the excess wire
Then using your lighter or Hot air gun , shrink the tubing were the connection was made (Use Picture As Reference )
Using your pliers , crimp the wire , were the strain relief tabs are .
Then using your lighter or Hot air gun , shrink the tubing were the connection was made (Use Picture As Reference )
Using your pliers , crimp the wire , were the strain relief tabs are .
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
