With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This instructable shows you how to use the MakeMP3 player kit, velleman amp, and an old blank CD case to make a little portable radio. Its using a the...
Parts: -MakeMP3 Player kit. -Velleman Amp K8066 -RadioShack 1/8" Panel Mount Jack: 274-249 -RadioShack 4AA Holder: 270-383 -RadioShack 9v Snap Connec...
Remove your speaker from it's case. Mine had this little tweeter deal on it. So I cut two holes in the CDR case cover. One on top for the speaker and ...
I cut the post off right above my support the make mp3 player. I used a 1-1/8" - 1" threadless stem adapter as the pedestal, but you could us a film...
You will need 6 holes in the CDR cover case, 2 for the volume buttons 2 for the track selectors 1 for play/pause 1 power switch. I would put them ...
It's time to put together the MakeMP3 player kit. Follow the instructions that come with it, its easy and the PDF is very helpful. I would plug it i...
Now its time to solder the Velleman Amp. Once again, could not be easier. Hmmm I didn't take a pic of that 3w kit, here is the 7w kit.
Drill holes in the bottom of the CDR case for mounting the amp and the AA battery holder.
Drill holes in the CDR blank to use as the mount for the MakeMP3 kit.
Solder the power switch, go from the 9v snap connector (on the AA battery holder) to the switch. From the switch go to the MakeMP3 player kit, and th...
Time to solder the pushbutton switches. The switches all share a common ground with the mp3 player. Cut long pieces
Hook the mp3 player kit up. I will probably take this apart again later, so I am using a solderless breadboard for this. Look at the MP3 player kit ...
Time to close it up and rawk.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »