Introduction: Make Paper Plane That Flies High in the Sky

Hello friends, Today I'll show you how the make a paper plane that flies high in the sky. You have to use rubber bands to make it fly.

Please follow the steps to make the plane. Watch the video to get more idea and see how the plane flies.

Step 1: Things You Need

A4 sheet - 1

Scissor

Rubber bands -2

Step 2: Take the A4 Sheet

Step 3: Fold the Piece of Paper in Half

Step 4: Unfold the Paper

Step 5: Fold 2 Corners to the Center

Step 6: Fold 2 Corners to the Center

Step 7: Fold 2 Corners to the Center Again

Step 8: Fold 2 Corners to the Center Again

Step 9: Fold 2 Corners to the Center Again

Step 10: Fold 2 Corners to the Center Again

Step 11: Then the Paper Will Look Like This

Step 12: Fold the Paper

Step 13: Mark the Cut

Mark a cut using a pen, 8cm from the tip.

Step 14: Cut the Paper Using Scissor Along the Mark Added in Previous Step

Step 15: It Will Look Like This After Cut

Step 16: Unfold the Paper

Step 17: Just Fold the Paper Part Which Below the Cut

Step 18: Do Same to the Other Side

Step 19:

Step 20: Make the Fold Line Perfect Using the Finger

Step 21: How to Arrange the Rubber Bands

Step 22: How to Arrange the Rubber Bands

Step 23: How to Arrange the Rubber Bands

Step 24: How to Arrange the Rubber Bands

Step 25: How to Arrange the Rubber Bands

Step 26: Put the Rubber Band to the Cut

Step 27: Pull the Plane by Hand and Release to Fly

Step 28: Watch the Video and Get Clear Idea

Please comment any questions you need to solve regarding the instructable.

Please vote me for the "Make it Fly Contest" if you like my instructable. Thanks a lot

Comments

author
Swansong (author)2017-08-10

That looks fun :) The rubber band launcher is a good idea!

author
tdapower (author)Swansong2017-08-10

Yes, Thanks for your comment

About This Instructable

221views

1favorite

License:

Bio: I'm a software engineer who likes electronics and crafts.
More by tdapower:Make Paper Plane That Flies High in the Sky
Add instructable to: