loading

Wonder How we can make our own waterproof photos?

with Transparent Duct Tape!

Withing 30 Seconds you can make your photo transparent.

This Might be not the best waterproofing old school Technique..

but it works :P

Step 1: Gather Materials Required.

1x Roll of transparent Duct tape. ( Any size would work)

1x Photo

---------------------

Water, Cutter and Acrylic Board.

That's it :) .....

Step 2: Tape Picture on Acrylic Board

Place the Picture on Acrylic and Start taping on Picture Side .

Note : You Should overlap tape from one side.

Step 3: Cut the Excess Tape

Now take your Cutter and cut the excess Tape .

And Take out the Picture with tape attached on it.

Step 4: Apply Water at the Back of Picture

Now apply water and smug your finger on it.

the paper would start getting detached from the tape.

Step 5: Finished!

Now this may be not the best picture quality or it may be due to the newspaper picture quality.

You can try with Glossy paper too . which would give better Results.

Thanks for Going through this Instructable!.

Vote me for Duct Tape Contest if you like it :)

About This Instructable

477views

7favorites

License:

Bio: Just a Small Tinkerer ;)
More by Ayush Sharma:Pocket ESP8266 Weather Station [No ThingsSpeak] [Battery Powered] Make an Simple Motion Sensor Theft Alarm! (PIR)  (DIY) How to Make ESP8266 Ultra Mini & Simple Relay Home Automation Board 
Add instructable to: