Introduction: Make Shipping Case From Copy Paper Box

Picture of Make Shipping Case From Copy Paper Box

Need to ship out something, but you don't have a shipping box? Check out the copy machine. Grab an empty copy paper box and follow these instructions.

Step 1:

Picture of

Measure width of copy paper box and divide measurement by 2. For example, if box width is 11 inches, your new measurement would be 5.5 inches.

Step 2:

Picture of

Using this new measurement, measure from top of box and make a mark in each end corner. For example, measure 5.5 inches down from top and mark.

Using razor blade box-cutter, carefully cut from mark to top of box at each end corner.

Step 3:

Picture of

Fold end flaps inward.

Step 4:

Picture of

Fold side panels inward. New shipping case should be 3 to 5 inches deep. Ready to use.

Comments

patrickkeane (author)2006-02-02

If you score the box with a knife, you'll have an easier time with the bends...

About This Instructable

4,531views

7favorites

License:

More by BobBilson:Make Shipping Case From Copy Paper Box
Add instructable to: