Instructables
loading
loading
Picture of Make Signs out of Cardboard!
P1040047.JPG
How to make signs out of cardboard. Yes, it's easy and quite effective. All you need is a band saw or scroll saw, some free cardboard, a little imagination and you can make many different signs. For this instructable, THINK is used to show the process.
 
Remove these adsRemove these ads by Signing Up

Step 1: Design and cut out sign letters

Picture of Design and cut out sign letters
P1160002.JPG
To make this sign, I went into my word processor and simply selected a font and made it to the size I wanted. In this case, it's 350 points.

Step 2: Trace or outline letters on your cardboard

Picture of Trace or outline letters on your cardboard
Simply hold letters down and outline them with a dark pencil.

Step 3: Cut out all letters on the bandsaw (or scroll saw).

Picture of Cut out all letters on the bandsaw (or scroll saw).
I use a 1/8 inch blade on the saw so that it is relatively easy to make the curves necessary in cutting out the letters.

Step 4: Cut all letters

Picture of Cut all letters
P1160006.JPG
Finish cutting letters.

Step 5: Cut some border strips

Picture of Cut some border strips
For this sign, border or frame strips are 5/8 in. wide.

Step 6: Glue all pieces to Backing

Picture of Glue all pieces to Backing
Carefully line out letters and place where wanted. Add glue and press into place. Borders are glued in this step also.

Step 7: Add some hangers to sign

Picture of Add some hangers to sign
For hangers, I simply use some scrap paper, cut to about 5/8 inch, punch a hole in the two pieces, and glue into place. Sign is very light, so this method is sufficient.

Step 8: Admire your sign

Picture of Admire your sign
Stand back and enjoy your handiwork. Sign is ready to hang.

Step 9: Possibilities:

Picture of Possibilities:
P1160012.JPG
P1160019_00.JPG
P1160018.JPG
P1160009.JPG
P1160013.JPG
Several other examples are shown to demonstrate possibilities for making signs. Check out my shop on Etsy.http://etsy.com Enter creativeman under sellers:username

Step 10: Additional Cardboard Signs

Picture of Additional Cardboard Signs
P1300016.JPG
P1300017.JPG
P1300010.JPG
I keep making these, thought some would like to see them. Hope your efforts are going well.

Step 11: One more thing...

Picture of One more thing...
P1300001.JPG
I needed to re-do my graphic on this sign so that it looked more reasonable. What do you think?
1-40 of 79Next »

Nice and beautiful. All it needs is a little paint and will look like plastic.

Uncle Kudzu2 months ago

Do it all backwards and multiple prints (collograpy) could be made with your method. Very cool! I wouldn't have thought to use a bandsaw on cardboard.

Thanks for sharing this!

here is a picture of how the aluminium foil would add to the overall appearance to the signage.
Image0739.jpg
Creativeman (author)  Edwardo Leon2 years ago
Thanks for your comments and it does give a different look. I wonder how larger letters would look???
Nice Instructable. I have done similar sign in the past. I put aluminium foil to cover the entire sign after putting on white glue to glue the foil in place. it will give a silver metalic look to the sign and after painitng the backround with a colour of your choice, the letters will standout.
Awesome! I might try this!
Creativeman (author)  Adambowker983 years ago
Go for it!
I need to find some cardboard first...
Very Cool!
From your 600th follower
Creativeman (author)  bobthebuilder7283 years ago
Thank you! A milestone for sure.
TheGeek19843 years ago
So simple, yet so awesome!
WhiteTech3 years ago
Great instructable, I know exactly how to use this, and I can save a bit of time making the letter stencils, my mom has a Cricut ;)
ashwinlit3 years ago
can you pleaasee send me the picture of the gun, I want to make the sign!
Great Instructable! 5/5
Creativeman (author)  jeffconnelly5 years ago
Thanks, jeff! Cman
Great idea! I think I will try it but I will recycle plastic campaign signs instead of cardboard. They often leave them up long after elections around here. After painting them would make a great name sign for my house. Plus it would be weather resistant. Love the I DON'T CALL 911 sign!!!
clint1145 years ago
For this project and for boxmaking, matboards (like framers use) is good, especially because it has solid sides that don't need to be filled. You might be able to talk your local frameshop into giving you their dropouts and scraps (since I realize the whole purpose of this exercise is to recycle and not spend money). Matboard also has the advantage that it is acid free and will last longer than corrugated cardboard. It cuts easily with a matknife or a razor blade.
jokerlz5 years ago
I did this. I didn't have a saw so I used a penknife so its a bit rough around the edges. (But you can't see that because my rubbish camera doesn't pick it up.)
jokerlz jokerlz5 years ago
Oops forgot pictures.
100_3906.JPG
finnrambo5 years ago
does anyone call 911 here, or are we all meaniepoopers?
rofl!!! I dont call 911! .....Could you just do these with an exacto knife? It would be cool if you cut out a strip of cardboard that sticks out 90 degrees from the revolver's barrel then it would be uber cool 3d Madness!!!
How about cutting out small circles the size of the gun barrel and gluing them together to whatever length you want, then gluing them onto the barrel circle. You'd have to fill in the cardboard holes with somthing though...maybe just a strip of paper wrapped around it with the seam on the bottom and glued - all around and under the strip of paper.
jeff-o6 years ago
"Stone" looks cool! I also recognize the font used in "Simplify" - I used it on a name plaque I made for a friend!
Creativeman (author)  jeff-o6 years ago
Thanks jeff:it's a cool font.
Could you make an instructable on how to make the stone sign?
Creativeman (author)  mg0930mg6 years ago
Just make the sign you want using this ibile, distress the cardboard with the saw, following the illustration. then start painting: use acrylic craft paint, greys, black, some white, mix it up. A spray can of rock simulation paint can be used also. I have made tombstones with this method, they look real (and old).
Actually Michael's Craft store (and probably Wally World) carries a spray paint that looks like stone! It comes out slightly textured and speckled with small dark particles in it. Comes in a couple colors. An awesome way to make a cheap plastic planter look like an expensive stone one!! Another thing I've seen used is the paint used to coat the inside of your engine compartment...slight texture to it too. And how about glow in the dark or black light reflective for the kiddies too! Just a thought...
Cool! Thanks.
Creativeman (author)  Creativeman6 years ago
See this instructable: Holiday Decorations:Christmas, Halloween, Thanksgiving, step 8 for an example.
Maureclaire6 years ago
You could spray it or coat it with something to make it more durable too, huh ?
Just a nice coat of Elmer's white glue would work if your sign was supposed to stay inside. But if you plan on exposing it to the weather, maybe polyurethane would work. NICE instructable! You could make great gifts with this...say for a new babies room with birthday and weight and such or ABC's in nice colors. Really only limited by imagination. You could even use websites that offer free clipart for pictures to add...can't wait to try!
wenpherd6 years ago
cud you make printable template for the hand holding the gun in "i dont call 911"
Creativeman (author)  wenpherd6 years ago
how do you do that?
scan it i think
do what?
haha, nice kerning.
TekGremlin6 years ago
Great Idea, Very interesting! It is always great to learn fun new techniques for making signs. www.eaglesigncreative.com
wenpherd6 years ago
what word prosesser do you use?
Creativeman (author)  wenpherd6 years ago
works
agis686 years ago
S*M*A*R*T IDEA....5/5
1-40 of 79Next »