Print PDF
Favorite
Email
Step 2Be an intelligent designer
Create any stick figure person or creature that you can envision using the wire (and tinfoil).
Just make sure that from one of the feet (or other extremity) you leave at least 8" of extra wire for dipping your finished creation into the Plasti Dip.
You can fashion your creation into shape simply by twisting it all together or by using the hot glue gun method shown below. Anything goes in terms of creature design so long as it will stay together long enough to be dipped into the Plasti Dip.
You can create large flat surfaces by attaching tin foil over enclosed gaps before you dip it (such as done to the head of one of the bendy figures in the image below).
Just make sure that from one of the feet (or other extremity) you leave at least 8" of extra wire for dipping your finished creation into the Plasti Dip.
You can fashion your creation into shape simply by twisting it all together or by using the hot glue gun method shown below. Anything goes in terms of creature design so long as it will stay together long enough to be dipped into the Plasti Dip.
You can create large flat surfaces by attaching tin foil over enclosed gaps before you dip it (such as done to the head of one of the bendy figures in the image below).
| « Previous Step | Download PDFView All Steps | Next Step » |
2
comments
|
Add Comment
|
1
Feb 19, 2011. 5:04 PMTheStott
says:
that's really cool
Reply
Feb 25, 2009. 4:06 PMHatake07
says:
dude you are a genius!
Reply
 |
Add Comment
|
