Make Your Own Custom Glowing Etches

I will be showing people how to make a glowing design track-board-thing with only a few things. The idea for this came from this instructable by SLIMGUY379

Step 1: Materials

1. Some 1/4 inch(or thicker but 1/4" is best) plexi glass. You will only need 1.5"/1.5" pieces
2. LEDs. Small 1/8" ones. Any color.
3. A sharp pointy object
4. A paint stirrer or other piece of wood/plastic 1/8" thick.
5. some conductive tape. Aluminum foil and glue should work.
6. 1/8" drill bit and drill
7. Power supply right for the LEDs you have. I used a 4.5v wall transformer and a 100 ohm resistor.

Comments

[tgiv014]

I want to see if i can use my schools CNC mill to etch something in a plexiglass panel, not sure if they'd let me, but it'd would be pretty clean and look a little nicer.

[benthekahn]

Yeah, I have never been that good at drawing or related things such as etching small, intricate designs, but a CNC mill is good at that.

[tgiv014]

I can barely even draw, and I know a knife and plexiglass would make that even worse for me. But I love the concept.

[frikkie]

I think if one uses an negative off an photo to etc on plastic.It would be like an negative off someone in colour.

[GorillazMiko]

Nicely done. I'm definitely going to try this out soon, well, first I have to etch something, or find the thing that I got from somebody that looks like the first image. +5/5 stars. (added to favorites)

[benthekahn]

Cool!

[=SMART=]

Dammit i need some plexiglass, when i get some ill do this, it looks very cool :D

[bumpus]

i need some aswell... OFF TO HOME DEPOT!!

[=SMART=]

ill have to wait untill the weekend :(

[bumpus]

i have to wait till 6 o'clock :(

[=SMART=]

lol

[=SMART=]

5* + Favrouited too :P

[tech-king]

also on the cool list, ible coming soon, is the long lost painted plexi etching technique.