Print PDF
Favorite
Email
Step 3Making it Portable: Cutting the Cones
Now you have to make it foldable so you can take it with you. To do this, take out your ruler, pen/pencil, and utility knife.
On one and only one of the cartons (or one half if you have a 12-egg carton), measure about 3.5 cm down the cones. Draw a line around as shown in the first picture. Use the knife to cut where the line is. The way I did this was to saw through 3 sides of the cone, and cut off the last side using scissors, as shown in the third picture.
Now, if you put the other carton, with the cone facing down, into the holes we just made, it should fit snugly. Your set is coming together.
Next, we have to attach the two cartons.
On one and only one of the cartons (or one half if you have a 12-egg carton), measure about 3.5 cm down the cones. Draw a line around as shown in the first picture. Use the knife to cut where the line is. The way I did this was to saw through 3 sides of the cone, and cut off the last side using scissors, as shown in the third picture.
Now, if you put the other carton, with the cone facing down, into the holes we just made, it should fit snugly. Your set is coming together.
Next, we have to attach the two cartons.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
