Introduction: Make Your Subwoofer Rave!

PLAY VIDEO

This is a really cool LED Project for you! Subscribe for more!

Here's a link for calculating your required resistor http://ledcalc.com

To see more from me, subscribe to Simply Electronics on YouTube.

Follow on Twitter

Like on FaceBook

Comments

author
AiridasJ (author)2016-10-22

Would this work with LED strips? I want to add some to my car so they would react to my car's subwoofer.

author
Sutty5 (author)AiridasJ2016-10-22

LED Strips require a higher voltage, usually 12v. You would need to use a mosfet transistor with the woofer across Gate and source and additional power input (the 12v battery) across Source and Drain with the LED strip in series. I'll mock up a schematic if you need to illustrate this for you.

About This Instructable

197views

4favorites

Bio: Simply Electronics YouTube is a channel created to Inspire, Educate and Entertain new and experienced Electronics Enthusiasts. Join me in the exploration of the world ... More »
More by Sutty5:What Is an LDR? (Light Dependant Resistor)Using Zener Diodes: Voltage Regulator (Part 1 and 2)Potentiometers?
Add instructable to: