Print PDF
Favorite
Email
Step 5Remove from the mold and trim
Once the heart has set, remove the heart from the mold by loosening the edges with your fingers then turning it out onto a plate.
Then, trim away any excess from the edges. Cut at an angle (i.e. make an inward bevel) for a better effect.
With a small spoon, scoop out the arteries up top. Use a straw for the smaller ones.
Then, trim away any excess from the edges. Cut at an angle (i.e. make an inward bevel) for a better effect.
With a small spoon, scoop out the arteries up top. Use a straw for the smaller ones.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
