Instructables

Make a Clock out of a Bicycle Brake Disc

Step 5: Legs

Picture of Legs
C:\Documents and Settings\SerJ\My Documents\Instructables\1 - Brake Disc Clock\DSC03636.JPG
You can now either put a large screw through the 12 o'clock hole and hang the clock on the wall, or like me, you can attach the legs to it if you would like it to be freestanding. As you can see, i got 2 long 2.5" bolts and a couple of nuts for them. I chose round cross head bolts, but you can of course try the big fat hexagonal heads too. Ive put them through the 5 o'clock and the 7 o'clock holes. This way, not only they will now tell me when it is 5 o'clock, and 7 o'clock, but i think it gives the it the best angle when it is stood on the table.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!