With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Don't even dare read this Instructable unless you have read Volpin's Daft Punk helmet tutorial first. If you're satisfied with sub-par, stay on this p...
Materials:A helmet of some sort, generally a batting, skateboard, or some other rounded helmetCardstocka PrinterMasking TapeElmer's glue2 Aluminum Can...
if you haven't already downloaded the pdf's that contain these files, download them here : http://www.mediafire.com/?sharekey=5f31918b5d7318337069484b...
I covered the whole thing, section by section with small amounts of the fiberglass resin jelly. You mix the Resin with the hardener, and then apply it...
You now need to put together the ears, if you have not already done so. You need to cut the bottoms off of two aluminum soda cans, and the attach arou...
The thing that you will be doing most in this instructable is going to be sanding.. so get used to it!
Now apply the Bondo, mixing it together using the instructions on the can. Sand inbetween applications of Bondo, to make it easier to apply the next c...
Sand frequently, and add more Bondo to spots that need to be filled in. I also sprayed on a light coat of the Chrome paint to help me see where I need...
Add some more paint, and let it dry, and continue adding more until you are satisfied.. I used the whole can on my helmet.
Cut the visor out of your safety mask, by tracing the design on, and then cutting out with a jigsaw or a dremel tool. Try to cut it out as cleanly as ...
Put the visor in the helmet, it should fit if you did everything right, and just slide it in, and adjust it until it looks right. It is finally done!P...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »