Make a Fog Chiller for $10

Step 9 Wrapping it up

Notes for best preformance:

• Make sure no fog can leak out between the PVC coupling and the fog machine
• Make sure the cooler cover seals tightly
• Be sure to add ice every half hour or so
• Angle the whole setup slightly, so that the melted ice water can drain out the front of the machine.
• The only place fog should be coming out is the exit hole, opposite the fan. If it is leaking anywhere else, seal it.
• Wind kills fog. Running this on a breezy day will yield very poor results.

Here are some pictures of the fog chiller in action:
1. Through chiller, with ice
2. Normal Fog
3. Black Chiller