Print PDF
Favorite
Email
Step 2Dissassemble and remove unneeded parts
Now that we have the major parts of the guitar, we need to remove the bits we don't need.
First i unscrew and take the back off of the guitar, remove the logic board, speaker, and dial. I left the long "fret board" in place since i will modify it to work with the keypad.
Next is to disassemble the keypad. Mine only had two screws outside and two inside holding it together. What we want here is the circuit board which is the brains of the keypad. you want to keep the plastic sheets with traces on them (also known as the key matrix), as they can be useful in figuring out the keys.
First i unscrew and take the back off of the guitar, remove the logic board, speaker, and dial. I left the long "fret board" in place since i will modify it to work with the keypad.
Next is to disassemble the keypad. Mine only had two screws outside and two inside holding it together. What we want here is the circuit board which is the brains of the keypad. you want to keep the plastic sheets with traces on them (also known as the key matrix), as they can be useful in figuring out the keys.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
