Instructables

Step 1: Materials

You will need:
- One live Christmas tree.
- One live Christmas tree stand. Although you can't see it in the pictures because of the tree skirt, I used a tree stand with a 1-gallon reservoir, 360-degree x 10-degree tilt with a foot locking mechanism. Any tree stand should work though.
- A bucket that's about as tall as the top of your tree stand. Any plastic container that holds more water than your tree stand should work though.
- A box with a lid. The box should be big enough that your bucket can fit inside it.
- Wrapping paper and bow for decorating the box.
- Approximately 4-feet of 3/8" plastic tubing. Other dimensions may work and you can go longer or shorter if you need, but 4-feet met my needs well.
- Two 3/8" Compression Couplings x 3/4" MIP Brass Adapters with nylon or plastic bushings for the compression couplings. It's important that the compression end be the same size as the outside diameter of your tubing, but the other end is unimportant. This will be used merely as a weight to keep the end of the tubing in the bottom of the reservoir and bucket.
 
Remove these adsRemove these ads by Signing Up