Instructables

Make a Korg Kaossilator Guitar

FeaturedContest Winner
I came up with the idea for this project when I saw a video of Wayne Coyne of The Flaming Lips. He had mounted his Kaossilator on a guitar and a taped the neck of a video game controller next to it to make it look like he was fingering the notes. I thought "Hey, I can do that for real!"

WARNING: Playing such an instrument may induce Funky-Techno-Madness.

Watch in HD

Watch On Blip.tv


 
Remove these adsRemove these ads by Signing Up

Step 1: Parts and Tools

A major part of my design is the ability to take the Kaossilator out of the guitar. One of its greatest features is its pocket-portability. I don't want to lose that.

For this Project you will need...

Parts-

Korg Kaossilator (They are usually yellow but there are limited edition pink ones available too)
RedOctane Guitar Hero Les Paul Controller (It fits perfectly into these models and the removable neck and faceplate make it easy to remove the Kaossilator.)
1 IDC Female Socket for Ribbon Cable
Ribbon Cable (at least 10 conductors)
.1 Inch Header Pins (Double Row)
Proto-board (I get mine from a seller on ebay)
50k Ohm Resistor
1/4" Stereo Output Jack
Les Paul Style Jack Plate
4 #4387 Gibson style pickguard screws
Stereo RCA Audio cable
Great Stuff Expanding Foam Insulation

Tools-

WD40
Hex Screwdrivers
Small Pliers (not needle nose)
Hacksaw Blades (different sized teath cut different plastics better)
Exacto Knife
Vice Grips
3/8" Skew*SHARP! (For cleanup work)
Soldering Iron
Wire Strippers
PanaVise Junior Clamp (#ci0011)
Hot Glue Gun

This reminds me of a product called the Misa Kitara (http://www.misadigital.com/)
which is essentially a guitar-shaped synth.

The only real differences are:
a) The Kitara costs $900
b) It has a touchscreen similar to a tablet (as opposed to the Korg laptop touchpad).

I REALLY like this project, and (providing that I finish my rendition) it's saved me around $900 worth of instrument.

THANKS!
tylercard2 years ago
Great instructable!
bglasby2 years ago
Do you have any links to the actual parts or do I just search the net for each one? Would be nice to link each part with where to get them. That or offer a do it your self kit with the parts needed.
keeverw3 years ago
This is the coolest thing I've ever seen in my entire life!!!!!
Ok, maybe I'm exaggerating a little. :)
But this is really awesome!

After much research on my part, I have asked my wife to get me a Kaossilator for Christmas this year, because after playing with one at Guitar Center, I must have one. These things are too much fun and addictive. And the only thing that would make them more fun and addictive is having it mounted in a guitar.

Aside from looking awesome, I really think this mod would make the Kaossilator much more playable as an instrument, because accessing the control buttons would be much more ergonomic. Also the sustain button would add a lot of playability to the device as well.

I can't afford to buy one of these, or I would. And right now I can't even afford to parts to build one, but I will start gathering them up little by little, and maybe by then the new will have also worn off of my Kaossilator enough to where I am not so scared of opening it up and working on it. I am an electrician, so I am not scared of the soldering or anything. So hopefully mine will turn out as good as yours did. Painting the guitar yellow definitely added a nice touch.

I can't thank you enough for putting this instructable online, so I can know how to do this myself. I have heard some music made on the Kaossilator and it is very impressive once you know how to use it. And putting it in the guitar frame with the sustain button is only going to add to how awesome it is.

Great job!
Wayne
jhardee keeverw2 years ago
http://www.amazon.com/Korg-Kaossilator-Dynamic-Phrase-Synthesizer/dp/B000ZJWZYU/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1314416858&sr=1-1

i saw this instructable and i had to make it, but i too have a limited amount of money, so i amazon-ed it. TGFA

hope you are able to get it now :D
James Haskin (author)  keeverw3 years ago
I'm so happy to hear you that dig my project. There's also the option of running the sustain feature to a toggle switch on the body instead. I'll try to update the instructable soon. I've made some improvements on the design since I published it. If you have any questions feel free to email or skype me.

James Haskin
Cool deal. The switch instead of the button for sustain might be a cool option.
But is there any reason you couldn't put both in parallel, so you could have more options when playing?

Is your parts list on the instructable still good, even after your new improvments?
James Haskin (author)  keeverw3 years ago
Yes that'd work fine. Just make sure you get an xbox 360 controller if you want to use the 5th button.

The parts are the same, however, I no install the resister for the 5th button on the protoboard instead of inside the neck. Also green craft foam from Jo-Ann Fabrics can be used instead of the spray foam. The spray foam is a lot harder to work with.
And one more thing I forgot to ask. There are at least 2 spare wires in that ribbon cable after doing your mods, correct? Because that would be enough to add in the guitar's battery pack using that same ribbon cable, so I wouldn't have to have any other wires hanging off the Kaossilator.

If not, I could always just plug it into the power supply jack, given I could find the right plug for it somewhere. But I'd rather just use the spare wires on the ribbon cable if there are at least two.
Another thing I was thinking of doing is using the battery pack on the guitar, and the on/off switch on the guitar to wire into the Kaossilator, in parallel to it's own battery pack. That way I could not put any batteries in the Kaossilator, but instead just put batteries in the guitar, and leave the Kaossilator's on/off switch to the on position, and toggle the power with the on/off switch that is already built into the guitar.

I just think first off it would eliminate the need to cut out that notch for reaching the Kaossilator's on/off switch. And second, if you are planning on leaving the Kaossilator in the guitar most of the time, as I am, it would make changing batteries much easier, because you could just change the guitar's batteries without having to remove the Kaossilator.

The only problem I forsee is that I think the Xbox Les Paul guitar only uses 2 "AA" batteries, and the Kaossilator uses 4. My PS2 wireless guitar controller uses 4 "AA" batteries but it's a totally different shaped guitar, and I don't know how well the Kaossilator would fit in there, plus you have less wires coming from the neck as you mentioned which is not cool either, because I definitely want to use the 5th button as a sustain.

Can you confirm if the Xbox Les Paul uses 4 or 2 "AA" batteries. I really hope it uses 4, but if not, I may try to find a guitar that does.
And what were the Gibson pickguard screws for? I didn't see them used in the instructable, or maybe I missed it.
James Haskin (author)  keeverw3 years ago
They're used to attach the jack plate to the guitar body
freudenheim4 years ago
I can't get to the link for the .1 Inch Header Pins (Double Row) (#ci0073). Can you see that at Curious Inventor, and if not point me to another site that has this? I'm very new to electronics and am not sure how to proceed.
 Thanks!
James Haskin (author)  freudenheim4 years ago
www.curiousinventor.com/store/product/193 
Yes Currious Inventor has them still.
When you finish post a picture :]

Can you also recommend where I could get a protoboard like the one in your photos? It looks tiny compared to the ones I could find at CI and elsewhere.

Also, does the ribbon just dangle from your Kaossilator when you're not using it inside the guitar?

Thanks for your help! Will definitely post a photo if we get this to work. We're starting without the sustain feature, not even the guitar jack at first, just want to make it work.

James Haskin (author)  freudenheim4 years ago
I buy my 1" two sided boards from Measure Explorer on ebay.

 Yeah, when the kaossilator is not in the guitar the ribbon cable just hangs.
It doesn't bother me :] You can make it pretty short but I like to make them 2 feet. You can always go shorter if it becomes an issue.

 I'd be happy to skype chat with you and give you some pointers. I have two Kaossilators open at the moment. Just email me insasquatchcountry@yahoo.com
Umm, I'm in England and want to make one of these. However, some of the links to parts are a. expired, and b. for America. Any chance that you could please post links to the parts for someone in England?

Thanks, great project :D
kdadd2 years ago
Awesome idea! I was wondering if it would be possible to do this but with a Korg Monotron instead? Either way I'm making one of the Kaossilator ones
B.F.L.M2 years ago
what about the wii? or should i just get an xbox controller/?
Tradecog2 years ago
Incredible idea. Hire this man, Korg, and expand upon the Kaossilator's amazing potential. Gonna have to have my electrical engineering mate help me out on this one though :-/

FYI: Thinkgeek charges far too much for the Kaossilator. Use Kaossilator HQ's link to save starving artists' money :)
ragdollman3 years ago
This is amazing!
I am planing on building this in the summer, I am just a bit confuesd about the sustainer.
Is adding the 50k resistor all I need to do to create the sustainer, or must I also follow 3amsleep's tutorial on sustainer modding?
Please help.
Thanks in advance.
888hilly3 years ago
Well now you need to install a GBA and your all set for a road trip!
moogbeatz993 years ago
dude, just a suggestion for mere cosmetic looks, you should add some sort of clip apparatus so the end of the ribbon cable just clips into some female connector screwed into the body of the Koassilator, so when/if you take it out of the guitar, you don't have that messy little slit you had to cut in the body.

merely a suggestion. AWESOME INSTRUCTABLE!! =D

check out mine, pleaseeee
offbest3 years ago
I finally decided to try to finish this, but I can't seem to get the scale or gate button working with the guitar neck. I've check and rechecked all my connections; swapped out the neck adapter, swapped out the 10-pin adapter, resoldered the SCA and gate connections and I'm out of ideas. Any input would be great. The protoboard looks fine, but is the only thing that hasn't been completely replaced so that is my next move.
steveoath3 years ago
Hi James, just a quick Q. If I'm not interested in the sustainer MOD do I just leave out step 10?
James Haskin (author)  steveoath3 years ago
If your using an playstation controller then yeah just leave out step 10. If you have an xbox360 controller You can the resistor in series with the switch on the neck or a separate one on the guitar body. It's a really cool feature. However, I no longer put the resistor in the neck. Instead, I put it on the protoboard in step seven Soldering Pt.1 If you have any other question feel free to ask. Post post pictures of it when you're done :D James
Cool - I'm starting another project at the mo' but thought I'd order the parts I needed for this as well. I'll post up my pics when done (possibly September!!! I know, but i'm busy busy busy!). Mine is one of the Pink Kaossilators, so expect some shocking pink bodywork!! Steve
offbest3 years ago
Great guide, but I'm having some issues. I have the guitar nearly completed and it just needs to be put back together, but when I turn on the Kaossilator it displays "dly" and I can't get it to do anything. I've tried attaching only the two connectors, and the connectors to the neck but the problem persists... Is there any areas I could have gone wrong and caused this? I had it working for a few moments, but when I reset it the problem came back.
Thanks
James Haskin (author)  offbest3 years ago
 The screen reads dLY when you enter a mode that give you the option of 16 beat loop while taking away the Fix function. You activate it by holding TAP and REC when you turn it on. It should go away after you release both TAP and REC. Make sure your soldering inside the Koassilator is clean and there are no crossed wires.
Wires must have been crossing in the connector, I cut the TAP and REC wires at the connector and it returned to normal. Thanks for the help!
offbest offbest3 years ago
I've figured some of this out. I can hold down the buttons and turn it on to get to "normal" mode, but none of the buttons work after that. The sustain works when I push orange as it should.

So I'm guessing the buttons are constantly being pressed simultaneously for some reason, since I have to reverse the process of getting into DLY mode.
 for what console is that guitar from?
andrum3 years ago
 is this a ps2 controller?
GOOD GOD I AM STARTING ONE IMMEDIATELY!
James Haskin (author)  SuperCoPilot3 years ago
 Post some pictures when you're done :]
Glockenator4 years ago
too confusing
IX Smith XI4 years ago
Tell me if am right, if you add a 10K Ohm resistor insted of the 50K Ohm resistor to the sustainer  mod it would make the note shorter?
James Haskin (author)  IX Smith XI4 years ago
No
What affects do you have when useing different Ohm resistors?
James Haskin (author)  IX Smith XI4 years ago
 Ah, now your asking the right questions :]
The XY pad uses 4 leads. I think, I'm just a hobbiest, ones positive, ones negative, and the other two are analog signals out. The 50 ohm resistor is just enough (or just to little) to make it think you're pressing down still. 

Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!