Print PDF
Favorite
Email
Step 3"Break It Down Now Yall"
There is a great How to Disassemble Your Guitar Hero Guitar Controller at fakeplasticrock.com. Take all of you screws and put them in a jar or cup. Don't throw anything away.
Now that you have the controller in pieces, set everything aside except for the top half of the body. This includes the faceplate. You are going to need to break off a few things in order to
1.) make room for the Kaossilator
and
2.) make that plastic easier to saw through.
There are two techniques I use. For the little stubby poles I just take some pliers an rock them back and forth until they snap off. For long lines of plastic I peal off sections at a time.
http://www.flickr.com/photos/jameshaskin/3340989018/sizes/l/
Now that you have the controller in pieces, set everything aside except for the top half of the body. This includes the faceplate. You are going to need to break off a few things in order to
1.) make room for the Kaossilator
and
2.) make that plastic easier to saw through.
There are two techniques I use. For the little stubby poles I just take some pliers an rock them back and forth until they snap off. For long lines of plastic I peal off sections at a time.
http://www.flickr.com/photos/jameshaskin/3340989018/sizes/l/
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
May 8, 2010. 3:23 PMandrum
says:
is this a ps2 controller?
Reply
 |
Add Comment
|
